SEASiR Fishing Reel Maintenance Kit – Solid Grease + Liquid Lubricant Oil | 20ml x 2 | Bearings, Gears & Gear Discs

The SEASiR Fishing Reel Maintenance Kit contains two purpose-specific lubricants — a 20ml solid grease and a 20ml liquid lubricant oil — covering the full range of lubrication points on spinning and baitcast reels. The solid grease handles high-load gear and shaft surfaces; the liquid oil handles precision components including bearings, line rollers and handle knobs. Water-resistant formulation protects against saltwater penetration and corrosion. Both tubes feature a precision fine-tip applicator for targeted application without over-lubrication.

Why Reels Need Regular Maintenance

Fishing reels are exposed to three failure conditions that progressively degrade performance and shorten service life:

• Saltwater penetration: saltwater enters the reel body through seals and gaps; salt crystals form as the water evaporates and abrade bearing races, gear teeth and shaft surfaces; the abrasion accelerates wear and causes the characteristic grinding feel of a neglected saltwater reel
• Debris blockage: fine particles of sand, grit, dried bait residue and line coating fragments accumulate in the gear train over time; debris mixes with dried or degraded lubricant to form a grinding paste that wears gear teeth and bearing surfaces faster than unlubricated metal-on-metal contact
• Oxidation: metal reel components oxidise when exposed to air and moisture; oxidation forms surface rust on ferrous components and white corrosion on aluminium; fresh lubricant on reel surfaces forms a barrier coating that prevents direct air and moisture contact, slowing the oxidation process

Solid Grease — Gears, Gear Discs and Shafts

The blue solid grease is formulated specifically for fishing reel gear and shaft lubrication. Grease rather than oil is used on these high-load surfaces because grease stays in place under the lateral and compressive forces generated by the gear mesh — thin oil is flung off gear teeth during rotation and provides only momentary lubrication between applications; grease adheres to the tooth surface and forms a durable film that remains in contact through the full gear rotation cycle. The SEASiR solid grease is confirmed to be “made of a variety of additives which can effectively improve wear resistance and stability” and is suitable for “lubrication of metal friction parts to reduce noise and extend service life.” Apply a small amount to the main gear teeth, pinion gear, worm shaft and bail wire pivot points during a reel service.

Liquid Lubricant Oil — Bearings, Line Rollers and Handle Knobs

The red/pink liquid lubricant is a low-viscosity precision oil for high-speed, low-load reel components. Bearings, line rollers and handle knobs rotate at much higher speeds than the gear train with minimal load — the thin oil film needed is different from the thick grease used on gears; thick grease on bearings creates drag that slows the spool and reduces casting distance. The fine-tip precision applicator allows one or two drops to be placed directly onto the bearing shield or race without disassembly in most reel designs. Apply one drop per bearing, one drop to each line roller race, and a light application to handle knob shafts.

4 Benefits of Regular Reel Maintenance

• Improved smoothness: fresh lubricant eliminates the metal-on-metal friction that causes grinding, roughness and notchiness in the retrieve
• Reduced gear wear: a lubricant film between gear teeth prevents hard friction that progressively removes material from tooth surfaces and causes gear slop and noise
• Anti-oxidation protection: lubricant coating on metal surfaces prevents direct air and moisture contact that causes rust and corrosion on internal components
• Debris exclusion: fresh grease on gear surfaces is viscous enough to trap and suspend fine particles rather than letting them abrade the metal; regular re-application flushes old contaminated grease with fresh clean lubricant

Compatible Reel Types

Suitable for all common reel types: spinning reels (front and rear drag), baitcast reels, overhead reels, and fly reels. Apply to bearings, main gear, pinion gear, worm shaft, bail wire, line roller, handle knob shaft, and drag washers (grease only on drag contact surfaces, not drag washers themselves).

Contents

• 1 x SEASiR Solid Grease (blue tube) — 20ml
• 1 x SEASiR Liquid Lubricant Oil (red tube) — 20ml