{"product_id":"purelure-amaro-pro-heavy-lure-rod-toray-t1100g-hx45-90-full-fuji-alconite-aaa-cork-7-0-8-3","title":"PURELURE Amaro Pro Heavy Lure Rod – Toray T1100G | HX45+90 | Full Fuji Alconite | AAA Cork | 7’–8’3’’","description":"\u003cp\u003eThe \u003cstrong\u003ePURELURE Amaro Pro\u003c\/strong\u003e is a heavy lure rod built on Toray T1100G ultra-high-strength carbon with a multi-axis HX45+90 reinforcement layup, full Fuji Alconite guide rings, Fuji ECS and VSS reel seats, a one-piece AAA grade cork grip and a reverse-reinforcement ferrule. Available in 10 configurations from 7…0’’ to 8…3’’ in Heavy through Extra Extra Heavy power, in both casting and spinning variants with 2-piece and 4-piece travel options. Designed for heavy lure fishing — large surface lures, heavy soft plastics, swimbaits and jigs for large bass, kingfish, snapper and estuary species.\u003c\/p\u003e\u003ch2\u003eToray T1100G Ultra-High-Strength Carbon\u003c\/h2\u003e\u003cp\u003eThe Amaro Pro is constructed from Toray T1100G carbon fibre — a step above the 40T intermediate-modulus carbon used in standard premium rods. Toray’s T1100G belongs to the T1000 fibre series, which combines ultra-high tensile strength with very high tensile modulus (approximately 65 ton\/mm², compared to 40 ton\/mm² for 40T carbon and 30 ton\/mm² for standard modulus carbon). T1100G uses a very fine filament diameter and high filament count per bundle, packing more fibre per unit cross-sectional area of the blank wall than lower-modulus carbon at equivalent wall thickness.\u003c\/p\u003e\u003cp\u003eThe consequence for a heavy lure rod: the Amaro Pro’s blank is rated for 12–80g lure weights at a 1.1mm tip diameter — a stress concentration at the tip section that requires carbon with the highest possible strength-to-weight ratio to withstand without fracture under load. T1100G achieves this at wall thicknesses thin enough to maintain the blank’s lightweight profile and vibration-transmission properties. A 40T construction to equivalent strength ratings would require thicker walls and greater blank diameter, adding mass that dampens the sensitivity T1100G delivers at this lure class.\u003c\/p\u003e\u003ch2\u003eHX45+90 Multi-Axis Carbon Layup\u003c\/h2\u003e\u003cp\u003eThe Amaro Pro blank uses a 40T main cloth as the primary structural layer, reinforced with T1100G carbon fibre at 45° and 90° overlays — the HX45+90 construction. This multi-axis approach is the same engineering principle used in aerospace composite structures and addresses a fundamental limitation of unidirectional carbon:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° main cloth (axial)\u003c\/strong\u003e: unidirectional carbon aligned along the rod’s length provides the primary tensile and compressive strength along the blank axis; this is where most of the blank’s bending strength comes from; the 40T main cloth provides this foundation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45° T1100G overlays (torsional)\u003c\/strong\u003e: carbon fibres at ±45° to the blank axis resist the torsional forces that act on the blank during a cast and when a fish runs at an angle; without torsional reinforcement, a blank under combined bending and twist loads can develop progressive micro-fractures at the fibre boundaries; the 45° T1100G overlay locks the main cloth layers against each other under torsional load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° T1100G overlays (hoop)\u003c\/strong\u003e: carbon at 90° to the blank axis resists radial — or hoop — stress; under bending load, the blank’s cross-section tends to deform from circular toward oval; a circular cross-section is structurally efficient under bending load; an oval section is not; the 90° hoop fibres resist this ovalization and maintain the blank’s circular cross-section under load, preserving its structural efficiency throughout the fight\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e4-Axis Inclined Cross Carbon\u003c\/h2\u003e\u003cp\u003eIn addition to the HX45+90 main cloth reinforcement, the Amaro Pro incorporates a separate 4-axis woven carbon layer at the ferrule and tip junction points. Four-axis carbon is woven with fibres at 0°, 90°, +45° and -45° simultaneously, distributing load in all four directions through a single woven layer rather than requiring four separate unidirectional layers. At the ferrule and thin-diameter tip sections where stress concentrations are highest, the 4-axis layer provides isotropic (direction-independent) reinforcement that resists load from any direction, protecting the blank’s most vulnerable zones.\u003c\/p\u003e\u003ch2\u003eFull Fuji Alconite Ring Guides\u003c\/h2\u003e\u003cp\u003eThe Amaro Pro is fitted with a full set of Fuji guides using Alconite ring inserts. Fuji Industries is the benchmark manufacturer for premium rod guides, and Alconite is a specific Fuji ceramic compound positioned between aluminium oxide (lighter, softer, lower cost) and SiC — silicon carbide (hardest, lightest, highest cost):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlconite hardness\u003c\/strong\u003e: harder than aluminium oxide, resisting the line-groove cutting that PE braid at heavy line classes and high cast speeds can cause on softer ring materials; at 12–45lb line class with heavy lure weights, line exit speeds are high and guide ring integrity is critical for long-term rod performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlconite weight\u003c\/strong\u003e: lighter than SiC at equivalent ring size and hardness, contributing to the blank’s overall lightweight profile; for a rod expected to be cast repeatedly with heavy lures over extended sessions, guide weight at the tip end is a meaningful contributor to tip-heavy balance that fatigues the wrist\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional consistency\u003c\/strong\u003e: Fuji’s manufacturing tolerances ensure ring alignment across the full guide set, maintaining the straight line path from reel to tip guide and consistent friction reduction across all guides on the cast\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFuji Reel Seats — ECS and VSS\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuji ECS (casting variants)\u003c\/strong\u003e: the ECS is a trigger-style casting reel seat with an exposed blank section between the reel foot pads; the exposed blank allows the angler’s palm to contact the blank directly, transmitting vibration from the blank to the hand without the insulation of a full reel seat body; at the Amaro Pro’s sensitivity focus, maintaining this vibration path to the hand at the reel seat is consistent with the design intent of T1100G construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuji VSS (spinning variants)\u003c\/strong\u003e: the VSS is Fuji’s standard spinning reel seat, a full-hood locking seat compatible with all spinning reels; VSS provides secure reel retention under the heavy loads of fighting large fish on spinning gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOne-Piece AAA Cork Grip\u003c\/h2\u003e\u003cp\u003eThe grip is turned from a single piece of AAA grade cork — the highest commercial grade of cork, with minimal surface voids and consistent density throughout the cork body. Cork has two advantages over EVA foam on a heavy lure rod:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration transmission\u003c\/strong\u003e: cork is denser than EVA foam and less dampening; it transmits the vibration signal from the blank to the angler’s hand more efficiently than EVA; on a rod where the entire construction is optimised for sensitivity from the T1100G blank through the Fuji Alconite guides, switching to EVA at the grip would reduce the vibration transmission at the final contact point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWet grip\u003c\/strong\u003e: cork provides a secure grip surface when wet; EVA absorbs water and can become slippery at the surface; for a rod used in offshore and heavy estuary fishing where the grip is regularly wet from spray, fish slime and rain, cork maintains grip security\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe butt cap is large and wide EVA, specifically designed for belly-bracing during extended fights with large fish; the wide profile distributes the rod butt pressure across the abdomen rather than concentrating it on a single point.\u003c\/p\u003e\u003ch2\u003eReverse-Reinforcement Ferrule\u003c\/h2\u003e\u003cp\u003eThe Amaro Pro uses a reverse-reinforcement ferrule — the female (socket) section is reinforced from outside the socket wall rather than from inside; this maintains the socket wall’s thin profile while adding structural support at the highest-stress zone of a multi-piece rod (the ferrule junction, where bending load is transferred between sections); stronger than standard ferrule reinforcement and less prone to the splitting and cracking that occurs when a thin-wall female socket is loaded repeatedly at its mouth.\u003c\/p\u003e\u003ch2\u003eVariant Guide — All 10 Configurations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-702XHC-F\u003c\/strong\u003e: 7…0’’ | 2-piece | Casting | Extra Heavy | Fast — compact heavy casting for tight impoundment and estuary environments; heavy jigs and large surface lures; 15–45lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-702XHS-F\u003c\/strong\u003e: 7…0’’ | 2-piece | Spinning | Extra Heavy | Fast — compact heavy spinning; large soft plastics and swimbaits from rock and boat; 15–45lb braid on 5000–6000 class spinning reel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-704HS-XF Travel\u003c\/strong\u003e: 7…0’’ | 4-piece | Spinning | Heavy | Extra Fast — travel configuration; 4 pieces for compact transport; light-end heavy spinning for travel fishing; 12–30lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-732HC-XF\u003c\/strong\u003e: 7…3’’ | 2-piece | Casting | Heavy | Extra Fast — the lightest power in the 7…3’’ casting range; hard body lures, topwater and medium-heavy soft plastics; 12–30lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-732XHC-XF\u003c\/strong\u003e: 7…3’’ | 2-piece | Casting | Extra Heavy | Extra Fast — extra-heavy 7…3’’ baitcasting; large surface lures and heavy jigs; the primary heavy baitcasting tool in the range; 15–45lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-734XHC-XF Travel\u003c\/strong\u003e: 7…3’’ | 4-piece | Casting | Extra Heavy | Extra Fast — travel version of the AO-732XHC-XF; same power and action in a 4-piece pack-down; 15–45lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-762XXHC-F\u003c\/strong\u003e: 7…6’’ | 2-piece | Casting | Extra Extra Heavy | Fast — the heaviest power baitcasting configuration; large swimbaits, heavy deep jigs and surface poppers for large kingfish and GT; 20–45lb braid on heavy overhead or large spinning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-782XHS-XF\u003c\/strong\u003e: 7…8’’ | 2-piece | Spinning | Extra Heavy | Extra Fast — long extra-heavy spinning; bank fishing, rock and offshore boat for large species; 15–45lb braid on 5000–6000 class spinning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-792XHC-MF\u003c\/strong\u003e: 7…9’’ | 2-piece | Casting | Extra Heavy | Moderate Fast — the moderate-fast casting option; slower action suits larger crankbaits, swimbaits and lures where the blank needs to load more deeply on the cast to project heavy lures at distance; 15–45lb braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAO-832XXHS-MF\u003c\/strong\u003e: 8…3’’ | 2-piece | Spinning | Extra Extra Heavy | Moderate Fast — the longest, heaviest, softest-action configuration; suits large swimbaits and heavy lures where casting distance is the priority and the slower action provides the load-and-launch casting rhythm for projecting heavy lures; 20–45lb braid on large spinning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: PURELURE\u003c\/li\u003e\n\u003cli\u003eModel: Amaro Pro\u003c\/li\u003e\n\u003cli\u003eBlank: Toray T1100G + 40T main cloth, HX45+90 multi-axis reinforcement, 4-axis cross carbon\u003c\/li\u003e\n\u003cli\u003eGuides: Full Fuji Alconite ring set\u003c\/li\u003e\n\u003cli\u003eReel seats: Fuji ECS (casting), Fuji VSS (spinning)\u003c\/li\u003e\n\u003cli\u003eGrip: One-piece AAA cork\u003c\/li\u003e\n\u003cli\u003eButt cap: Large EVA\u003c\/li\u003e\n\u003cli\u003eFerrule: Reverse-reinforcement\u003c\/li\u003e\n\u003cli\u003ePieces: 2-piece (standard) and 4-piece (travel variants)\u003c\/li\u003e\n\u003cli\u003eTop diameter: 1.1mm\u003c\/li\u003e\n\u003cli\u003eLine class: 10–45lb (variant dependent)\u003c\/li\u003e\n\u003cli\u003eLure weight: 10–80g (variant dependent)\u003c\/li\u003e\n\u003cli\u003ePower: Heavy, Extra Heavy, Extra Extra Heavy\u003c\/li\u003e\n\u003cli\u003eAction: Extra Fast, Fast, Moderate Fast (variant dependent)\u003c\/li\u003e\n\u003cli\u003eLengths: 7…0’’, 7…3’’, 7…6’’, 7…8’’, 7…9’’, 8…3’’\u003c\/li\u003e\n\u003cli\u003eConfigurations: Casting and spinning\u003c\/li\u003e\n\u003cli\u003eOrigin: China\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PURELURE","offers":[{"title":"AO-732HC-XF","offer_id":67598638153902,"sku":"14:173#AO-732HC-XF","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-702XHS-F","offer_id":67598638186670,"sku":"14:175#AO-702XHS-F","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-832XXHS-MF","offer_id":67598638219438,"sku":"14:193#AO-832XXHS-MF","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-762XXHC-F","offer_id":67598638252206,"sku":"14:1063#AO-762XXHC-F","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-782XHS-XF","offer_id":67598638284974,"sku":"14:366#AO-782XHS-XF","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-732XHC-XF","offer_id":67598638317742,"sku":"14:29#AO-732XHC-XF","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-734XHC-XF Travel","offer_id":67598638350510,"sku":"14:200002984#AO-734XHC-XF Travel","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-702XHC-F","offer_id":67598638383278,"sku":"14:200006151#AO-702XHC-F","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-704HS-XF Travel","offer_id":67598638416046,"sku":"14:10#AO-704HS-XF Travel","price":234.95,"currency_code":"AUD","in_stock":true},{"title":"AO-792XHC-MF","offer_id":67598638448814,"sku":"14:496#AO-792XHC-MF","price":234.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/5592\/2350\/files\/Sfe43fa2c1e634fad9960f5ec8286debaq.webp?v=1790707098","url":"https:\/\/castngo.com.au\/zh\/products\/purelure-amaro-pro-heavy-lure-rod-toray-t1100g-hx45-90-full-fuji-alconite-aaa-cork-7-0-8-3","provider":"Cast N Go","version":"1.0","type":"link"}